Secura Key dealers
have long asked for a rugged, no-nonsense dual technology prox
standalone like our RK65K that can read both Radio Key® cards and HID® prox cards
(26-bit), allowing them to merge systems or to transition customers
from HID® to Radio Key®. That’s why we developed the RKDT-SA-M and RKDT-SA-S.
The RKDT-SA-M is a
weatherproof standalone mullion reader, which controls up to 65,000
cards. It can also be converted to a Wiegand output reader when your
customer wants to move up to a larger system. It reads Radio Key®
cards, plus HID® 26-bit proximity cards. It is also available in a switchplate configuration – model RKDT-SA-S.
Radio Key®
dual technology readers, with 125 kHz proximity technology, use
automatic tuning to optimize the reader to its RF environment, which
provides dramatically better read range than competitive products with
the same antenna size.
Users are issued proximity cards or key tags which need only
be held within 6 inches of the unit to be detected. Presenting a valid card or
tag activates the solid-state relay and results in a long green LED and
audible beep. A Remote Open input is provided to allow activation
remotely via pushbutton.
Cards and tags are
added and deleted easily with a handheld programmer (RK-HHP). These can also be used to
set the latch timer from ¼ second up to 18 hours, or to toggle (on/off).
PC’s and external programmers are unnecessary.
RKDT-SA-M/RKDT-SA-S
can be used with the SecuRelay™ smart relay module. SecuRelay™ separates
the lock/gate control relay from the access control unit for added
protection.
A Wiegand output is
provided allowing the reader unit to be connected to a multi-door access
control or telephone entry system, if desired. When used as part of a
larger system the local card memory and relay may be used for degraded
mode or other special functions.
The RK-DT-SA-M is small
enough to be mounted on most door frames and mullions. RKDT-SA-S is the
size of a light switch plate. Both are fully potted for extreme
weather-resistance. Installation is extremely easy, requiring only two
screws. There are no external controllers or panels to install.
HID® is a registered trademark of HID
Global Corp.
SK-IDL -100 -Add Photo ID
capability to RKCMH-02: 20 mil adhesive-backed white PVC label: print
image with dye sublimation or thermal printer then slot punch and adhere
to card
RKKTH-02
(HID®#:1346) Key Tag encoded (specify format
26, 34, 37-bit)
