SK-KPM & SK-KPS
SPECIFICATIONS
| |
PHYSICAL |
SK-KPS |
SK-KPM |
Click image to enlarge
|
Depth |
.748 (1.9 cm) |
.875" (2.20 cm) |
| Width |
3.19" (8.1
cm) |
1.75" (4.50
cm) |
| Height |
5.12" (13.0
cm) |
7.25" (18.4
cm) |
| Weight |
8.6oz. (244 gm) |
8.8 oz. (250 gm) |
| Material |
Aluminum |
Aluminum |
| Color |
Natural |
Natural |
| POWER REQUIREMENTS |
12.28 VDC,
30 mA |
|
| OUTPUT - WIEGAND |
Data 1 and Data 0 |
Open collector 1K ohm. Pull
up to internal +5V |
| LED CONTROL
|
LED |
Bicolor (Red
& Green) |
| CCTV
INTERFACE
|
Activated
by keypress |
Open
collector 250 mA. 30
second duration |
| TAMPER
|
Photo-diode
sensor |
Open
collector 100 mA. Pulled
"low" when light sensed |
| HOLD
|
Ground
to Activate |
Causes
data to be held in keypad buffer when pulled "low" |
|
ENVIRONMENTAL
|
Ambient
Temperature
Humidity |
-40° to +257°F
(-40° to +125°C )
100% (IP68) |
| CABLE
REQUIRED
|
500
ft. |
maximum, 5-9
conductor 20 AWG shielded cable |
| OPERATIONAL
|
Pressing
one or more numbers followed by the # key sends the sequence of digits
via 26 bit Wiegand protocol to a host control panel.
Each keypress causes the Red LED to flash and the beeper to
sound. |
|
|
|
This product complies with IP68 (water
resistance), MIL Standard 810C, 202E, 461B, 462 UL & CE
Specifications subject to change without notice
©
COPYRIGHT 2002 5636
This document in PDF
Format
BACK | Warranty
Information