|
NET-CONV-P |
Optically
isolated RS-232/RS-485 converter specially configured
for connecting a PC to a Secura Key reader network. The unit plugs
directly into the PC’s DB9 male COM port. (If
the COM port is DB25, a standard
adapter may be added.) RS-485 cable is connected to
the terminal block and may be run up to 4000 feet to the reader network. A plug-in power
supply converts 110VAC to 9VDC.
|
|
SK-LAN |
An addressable
external device server, which allows connection of the gateway panel or
reader to a Local Area Network, using TCP/IP protocol. One SK-LAN unit
connects the reader network to the LAN, permitting access from any
connected PC. RS-232 cable is included.
|
|
SK-MDM |
56K Baud
external modem. Each SK-ACP panel and 28SA+ access control unit contains
the configuration data, or “setup string” for the SK-MDM allowing the modem
to be automatically configured in the field. Connect to 110VAC and
dedicated phone line. RS-232 cable is included.
|
|
CBLSA |
Cable kit with DB25 male, DB25 female and
DB9 female plugs and 3’ RJ11 cable.
|
|
SK-QUICKCONN |
DB9
to RJ11 3' cable - Laptop to SK-ACP/28SA Plus |
|
SK-PLUG9 |
DB9 female plug with wire pigtail to connect to
serial COM port.
|
| SK-USB |
Converts
a USB port to RS-232, for newer computers without COM ports.
|
|
SK-LOCK |
Cam lock
with two keys for securing SK-ACP enclosure.
|
|
SK-ACP-PS |
A plug-in transformer converts 110VAC to 24 VDC.
A 12 VDC, 1.9 amp-hour battery
provides
system backup power and stabilizes the voltage to the control panel.
|
|
SK-24VDC |
24 VDC,
500 mA Plug-in power supply |
|
|
|
SK-XFRMR |
16.5 VAC,
40VA plug-in grounding transformer only
|
|
SK-DCPWR |
Used
with SK-TRANSFORMER this power supply board
provides filtered 12VDC. Use to power the RK-WL proximity reader. Also recommended
for use with gate control systems to filter noisy source voltage. |
| DTK-XR |
Protects SK-ACP from surges on power,
data and phone lines. |
| DTK-CR |
Protects card readers and keypads from
power surges. |
|
SK-BAT |
12VDC, 1.9 AH battery only |
