• Supports Two Wiegand Output Card Readers
• 65,000 Card Capacity
• 4,800 Date and Time Stamped Stored Events
• 15 Programmable Time Zones with Weekly Schedule Plus Holidays
• 32 Programmable Holidays

• Over 100 panels can be linked to a PC with SK-NETTM software using a simple RS-485 bus
• Modem Capability for Remote Locations*
• TCP/IP Capability for LAN Connection*

      * Requires additional equipment

 The SK-ACP-LE Advanced Control Panel is a highly sophisticated, yet simple to use, two door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology, including Proximity, Touch Card, Wiegand, Magnetic Stripe, Bar Code, Optical, and Biometric. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each has a separate node address.

                                                                                     click here to enlarge drawing

Each of the two doors controlled by the SK-ACP-LE has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input. Each of the two doors controlled by the SK-ACP has two outputs. One output is the relay that activates the door operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations.

As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.                     

Over 100 SK-ACP-LE units may be connected together to control over 200 passageways with SK-NET^TM software, using a single twisted pair RS-485 bus. SK-NET^TM software allows integration of the units into a full featured Window® based, access control system.